The Daikin MXS Series of outdoor compressors offer a heating operation range of 5°F (with optional drain pan heater) up to 60°F and a cooling range from 14°F to 114.8°F. The MXS Multi-Zone Series also includes an enhanced drain pan. The new drain pan offers excellent drainage to reduce ice build-up in extreme conditions.
A multi-zone mini split system is an excellent way to add air conditioning to more than one area of your home or office without running ducts everywhere. Each indoor unit operates independently so you can cool one room to 68°F, for example while another space may be set to 74°F. Whether you have just added an additional room or don't have central air, with the 2MXS18NMVJU Multi Zone Mini Split System you simply choose two indoor units based on your individual needs and before you know it, you will have cooling and heating in your space when and where you want it.
The MXS multi-zone system, with inverter technology, works with several combinations of indoor unit styles and BTUs. Available BTUs range from 7,000 up to 15,000 BTUs depending on the unit type. Indoor units include the CTXS and FTXS Standard Wall units, the Emura Series Wall units FTXR, the Vista Series FFQ Ceiling Cassette units, FDXS Concealed Duct units, and FVXS Floor units. Contingent upon the indoor units you choose, the 2MXS18NMVJU outdoor unit will be able to achieve energy efficiency levels of up to 18.9 SEER, up to 12.7 EER, and up to 12.5 HSPF. Total comfort control with added savings!
With Daikin's Dual Zone solution, any two rooms can be controlled individually. The 2MXS18NMVJU Dual-Zone is rated for 18,000 BTU Cooling Capacity and must be connected to two indoor units. The combined BTU ratings of the units chosen can total up to a maximum connected BTU rating of 24,000 BTUs.
The Daikin 2MXS18NMVJU incorporates technology which allows you to connect higher BTU indoor units than its 18,000 BTU capacity. This will allow you to address higher load requirements used at different times such as living space and sleeping space. If you need a 12,000 BTU unit for your living room and a 12,000 BTU unit for your bedroom, you can use them with the 18,000 BTU outdoor unit. The system will allocate the required BTUs needed in each area up to the total of 18,000 BTUs. Let's say you need to condition the living room during the day. No one will be in the bedroom at this time so you have this zone shut off. When you turn on the system in the living room, the Daikin technology will supply the required BTUs to the living space up to the maximum output of the 12,000 BTU indoor unit. Now you decide to get the bedroom ready before bedtime so you turn on the bedroom unit. The system will automatically adjust and distribute power to the two zones as needed. If both zones need full power, then each zone will split the 18,000 BTUs evenly or 9,000 BTUs per zone. If one zone needs more, the system will adjust accordingly.
The 2MXS18NMVJU "variable speed" compressor with inverter technology features a space-saving design and quiet operation. Daikin's outdoor compressor allows the indoor units to operate with Reactive Temperature Monitoring. This technology allows you to set your room temperatures while the system will automatically adjusts the output required to reach your desired temperature levels. It uses R410A refrigerant, the industry standard. It also includes anti-corrosion treatment of the outdoor Heat Exchanger Fin.